Rare Earth
Rare earth magnets have been powerful permanent magnets utilized in a variety of industries. We use the benefits of the potency of the rare earth magnet to pull on tramp metal from various process escapes, accumulating ferrous contamination as well as amorphous magnetic substances. Rare soil material is Neodymium Iron Boron that’s manufactured into a magnetic circuit, organizing the poles to maximize the magnetic achieve and transmitting power of the magnet. Currently the strongest magnets are, available with MgO 52 rare soil stuff.

Ceramic magnets are primarily composed of strontium carbonate and iron oxide. This magnetic material is not as expensive and not as strong as a rare earth material. WPE Process Equipment manufacture high quality vibratory screening machine in Australia. For collecting massive pieces of tramp metal from a process flow, such as bolts and screw drivers, this magnet is a probable candidate for these applications.

Grate magnets, or tubing magnets, which are a perfect means to gather smaller ferrous contamination from your gravity flow or pneumatic flow of material with reduced ferrous contamination. This magnet is typically offered with rare earth cloth and rod pieces in the tubing to create a very strong magnetic circuit. Grate housings could be fabricated to add EZ clean design or self clean layouts.

A drum magnet may be used as a drum separator or a headset pulley magnet. In a drum separator, a stationary internal magnet covers a supplementary 180° arc within a rotating drum allowing material to flow over the drum, pulling the magnetic contamination and pulling it slowly out of their stuff flow on a constant basis. On a head pulley magnet, the magnetic circuit covers the whole 360° of the drum and utilizes that the belt conveyor belting since the principal method to eliminate the ferrous contamination from the procedure.

An overhead magnet is used commonly above a belt conveyor system. This magnet can be arranged consistent with the belt conveyor (Fig) or perpendicular to the belt conveyor (cross belt). These magnets can be found using both electro heels or permanent magnet designs. The electro-magnet layout delivers a deep reaching magnetic field ideal for applications that require increased suspension amounts or if a magnet needs to guard deep product burdens. Permanent magnets are a great economical solution where equipment safety is required, but where the load is not quite as heavy and the tramp metal contamination is larger in dimension.

A plate magnet is a very simple magnet that’s used either above or below a product stream. This magnet is available in the rare ground and ceramic designs, and can offer a stripping plate to assist remove the ferrous contamination. These magnets can have a flushed surface or lifted rod pieces to hold the tramp steel until it is washed in the surface of the magnet. Two plate magnets can be arranged into a hump magnet arrangement to guarantee touch of the ferrous material with the magnets. A hump magnet can be automatic to use an actuator to move the magnet away in your stripper plate to mechanically wash the magnet.

Different Kinds of Magnets

Leave a Reply

Your email address will not be published. Required fields are marked *